Cyclone technology pressure cleaning equipment is used to deeply clean the outdoor ground, which is more environmentally friendly than other methods. Use low pressure cyclone cleaning and ultra-high pressure at the same timeCyclone cleaning equipment,The use of cyclone cleaning suction cups and recycling boxes can effectively clean and eliminate the accumulated dirt on the road surface without damaging the road surface to meet the needs of any customer.

The suction cup of the cyclone cleaner provides high-speed air to form a vortex to recover wastewater without discharging to the road surface, and does not need an external vacuum system. Sustainable clean technology means that 95% of water is recycled and wastewater loss is eliminated. Solid waste is recycled and separated for proper treatment or recycling. Compared with the external vacuum pressure cleaning system, this process can more effectively recover the water from the clean surface.

Cyclone cleaning technology can be divided into high pressure cyclone cleaning (high pressure water about 20MPa) and ultra-high pressure cyclone cleaning (high pressure water about 200MPa). The ultra-high pressure cyclone cleaning technology can be used for airport rubber removal, pavement marking erasure, etc. We are committed to bringing you the best technology to minimize the damage to the road surface, and the operation process is faster, green and clean.

1、 Remarkable features compared with the suction cleaning vehicle

1. Vacuum free, cleaning water is recycled and reused by multistage filtration system.

2. Free of chemicals, only use water and heat to complete deep cleaning.

3. The patented design of the cleaning plate can be cleaned once and improve the efficiency.

4. It has greatly improved productivity and reduced the time required to clean up large space.

2、 Working principle

1. An air and water vortex equivalent to a level 4 cyclone is controlled and generated by the operator on the seat, allowing the maximum cleaning results on various surfaces - concrete, asphalt, pebbles, sports track, etc.

2. The cleaning disc is characterized by two high-pressure water nozzles (UNIJET TP-TC HYDRAULIC FLAT SPRAY TIPS) and eight turbine blades rotating at high speed. The continuous air flow creates suction, which recycles water while removing dirt and debris.

3. Vortex air and waste water further scour the surface - the result is a very deep cleaning.

4. Waste water is thrown into a water storage tank through air vortex, and then pumped into the water recovery tank there - to complete waste water recovery

Process without vacuum system.

5. Online multistage filtration system (CY860A) can clean and recover wastewater, prolong operation time and reduce water waste.

6. Non-vacuum design of cyclone technology means less maintenance and annual fuel cost, thus bringing faster return on investment.

Schematic diagram of working principle