(1) Core main pump: the negative pressure system power source (vacuum pump) can be driven by an independent diesel engine or an automobile chassis engine; Positive pressure (compressor) main pump is driven by automobile chassis engine.

(2) Integrated multistage filtration suction system (IMFS suction system) four-stage filtration system integrated design is installed inside the main tank. It reduces the defects of traditional filtration such as multiple sealing points and scattered discharge points, so as to ensure no loss of pressure in the working bin and realize single point discharge.

(3) Full-automatic intelligent pulse backwash system (APB backwash system) is a positive pressure pulse bag backwash system installed in the filter bag chamber, with a positive pressure of 0.8-Mpa; The continuous pulse reverse blowing cloth bag will not produce hardening on the surface of the cloth bag even if the material is pumped and easy to harden. The differential pressure of the cloth bag will always be kept within a reasonable range to ensure the long service life of the cloth bag. The positive pressure air source pump is integrated with the independent diesel engine to ensure the stability of the positive pressure air pressure and flow.

(4) Integrated explosion-proof control system (PEIC control system) is an integrated control system conforming to the explosion-proof grade of metallurgical enterprises. NEMA 12 explosion-proof control system components are used in the control panel; Easy to operate; Just open a button, and the whole machine will work normally; The control system is equipped with automatic cooling device for high vacuum pump temperature; Automatic cleaning device for high differential pressure of cloth bag; Automatic sound-light alarm and automatic shutdown device for main material tank full; High vacuum automatic protection device of vacuum pump; Double protection device for high positive pressure.

(5) The five-in-one central hydraulic station control system (CHSC hydraulic control system) is taken from the hydraulic control system integrated with the independent engine to ensure the hydraulic power of the tailgate opening/closing hydraulic cylinder, the tailgate locking hydraulic cylinder, the small door locking hydraulic cylinder of the built-in bag room, the 38-ton main tank body lifting/lowering hydraulic cylinder and the main tank body GLOBAL hydraulic rapper, so as to ensure the hydraulic power of the suction and discharge vehicle when working under positive and negative pressure, The air tightness of the working chamber is good and the main tank body is lifted in place.

(6) The main suction port with 270 degree steering is hung on the right side of the suction and discharge truck, and is only 1.6 meters high from the ground; As long as the suction and discharge truck is driven to the designated suction point, the 6-inch suction hose at the blanking position can easily be connected with the main suction opening that can be turned.

Qinhuangdao Scarlett Special Purpose Vehicle Manufacturing Co., Ltd. produced and developed tank pneumatic suction and exhaust vehicles, suction and exhaust vehicles, suction and exhaust vehicle manufacturers, suction and exhaust vehicle prices, tank pneumatic suction and exhaust vehicle companies, easy to operate, welcome to consult and purchase, manufacturer's telephone 0335-7399999

< >